Test of double-twisted cables: Switch on the power. (S is slow automatic grade, Mis manual.) Put cables into both main tester and remote tester. The lights of the main tester will turn on sequently form 1 to G.

Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-2-3-4-5-6-7-8-G RJ45
1-2-3-4-5-6 RJ11

Following are abnormal connections:

If one cable, for example cable NO.3 is open circuited, the two NO.3 lights of the main tseter and remote tester will not turn on.
If several cables are not connected, several lights will not turn on respectively. If less than two cables are conntected, none of the lights is on.
If two ends of a cable is disordered, for example NO. 2and NO. 4, then displays on:

Main tester: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
If two cables are short circuited, neither of the corresponding lights is on of the remote tester while main tester remains unchanged. If three cables, including three, are short circuited, none of the corresponding liaghts is on.
If test patch panels or wall plate outlels, two cables which can match each other (RJ45) will be connected to the tester.
If test cables of the same axes, BNC turns on when the cable works.

Network Cable Tester RJ45 and RJ11

Description: “The base unit of the cable tester can be connected via a network cable directly to a hub or switch to test wire connections, or to a network card to test the send receive pairs of wires, it can test if there is any open or miss-wire without the remote kit. 9 Led’s to show you exactly which wire is open or miss-wire on both remote and master unit. Old version has 4 Led’s. Master and Remote unit are both included. Automatic scan mode, Rapidly Testing. Power switch is not a push buttom will not easily turn on and waste battery.” Product Features: ■ Test correspondingly double-twisted cables 1, 2, 3, 4, 5, 6, 7, 8 and Ground. ■ Capable to judge wrong connection, short circuit and open circuit. ■ Cable Tester for RJ12, RJ11, RJ45, Cat 5e, Cat 5, Cat 6, 10/100 Base-T, AT&T 258 A, TIA-568A/568B

-40%